PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Bracket Unit [Bracket Unit] [2008]

Produits associés:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1997 - 2005 8hp All
Yamaha International 2001 - 2005 8hp All
Yamaha Outboard 1997 - 1999 6hp All
Yamaha International 2001 - 2005 6hp All

Bracket Unit [Bracket Unit] [2008]
LIT-18616-01-64
Yamaha Marine

PREPARATION FOR REMOVAL

  • Remove the power unit.
  • Remove the upper casing and bottom cowling.

Extent of removal:

(1) Swivel bracket removal
(2) Clamp bracket removal
(3) Swivel bracket disassembly

INSPECTION

Steering bracket and pivot shaft

  1. Inspect:
    • Steering bracket
    • Pivot shaft
      Crack/Damage ➝ Replace.

Clamp and swivel bracket

  1. Inspect:
    • Clamp bracket
    • Swivel bracket
      Crack/Damage ➝ Replace.

Tilt plate

  1. Inspect:
    • Tilt plate
      Crack/Damage ➝ Replace.

ASSEMBLY AND INSTALLATION

  1. Install:
    • Drive lever (1)
    • Pin (2)
    • Crip (3)

NOTE :
Face the arrow mark (a) upward.

  1. Install:
    • Spring (1)
    • Tilt plate (2) (outer)
    • Spring (3)
    • Tilt plate (4) (inner)
    • Pin (5)
    • Crip (6)

NOTE:
Align the holes of the tilt plate (inner) and (outer), after installing the pin.

  1. Install:
    • Bushing (1)
    • Pin (2)

  1. Install:
    • Clamp bracket (1)
    • Friction piece (2)
    • Bolt (3)
    • Collar (4)
    • Nut (5)

  1. Install:
    • Bolt (1)
    • Plate (2)
    • Nut (3)

Nut : 7 Nm (0.7 m-kg, 5.1 ft-lb)

  1. Install:
    • Steering shaft (1)
    • Washer (2)
    • Bushing (3)

NOTE:
Apply water resistant grease to steering shaft.

  1. Install:
    • Friction piece (1)
    • O-ring (2)
    • Bushing (3)
    • Bushing (4)
Share on social:

Produits associés