¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Setup Manual DF300 Installation Of Switch Panel[Installation Of Bcm (Boat Control Module)]

Productos relacionados:
Setup Manual DF300 Installation Of Switch Panel[Installation Of Bcm (Boat Control Module)]
99505-98J00-01E
Suzuki Marine

Step 1: INSTALLATION OF BCM (Boat control module)

• Install the BCM avoiding direct rays of the sun and water splash.
• Face the connector downward when installing the BCM.
• Before installing and removing the electric parts, turn the main switch OFF and remove the battery cable from the battery. When disconnecting the battery cable, remove the negative cable first and then the positive cable. When connecting the cable, connect the positive cable first and then the negative cable.

The following conditions must be observed when installing BCM.

  • Install in a dry protected area.
  • Area selected for installation must not exceed 75 °C (167 °F)
  • Anchor BCM to a flat solid surface.

(1) Install the cushion (1) to the BCM (boat control module).

(2) Install the holder R (2) and holder L (3) to the BCM and install the BCM with four (4) screws.

Step 2: BCM (Boat Control Module)

Step 3: BCM (Boat Control Module) holder L/R

Share on social:

Productos relacionados