CRANKCASE BOLT
The 10 mm (M10) crankcase bolts have been changed to a dacromet coating type. In accordance with this change, tightening
torque has been changed.
Crankcase bolt:
1st step 8 mm 5 N·m (0.5 kg-m, 3.5 lb-ft)
10 mm 10 N·m (1.0 kg-m, 7.0 lb-ft)
2nd step 8 mm 20 N·m (2.0 kg-m, 14.5 lb-ft)
10 mm 37 N·m (3.7 kg-m, 27.0 lb-ft)
Final step 8 mm 25 N·m (2.5 kg-m, 18.0 lb-ft)
10 mm 46 N·m (4.6 kg-m, 33.5 lb-ft)

TILT LIMIT SWITCH SYSTEM
To adjust the maximum tilt position, the tilt limit switch system has been added on the clamp bracket shaft.
Adjusting procedure:
To reduce the amount of tilt, move the tab “A” of cam upward.
To increase the amount of tilt, move the tab “A” of cam downward.

SWIVEL BRACKET
In accordance with the additional of the tilt limit switch system, the swivel bracket has been changed in shape and machining.

