¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Service Manual DF70, DF60 Tiller Handle (Df70Wth) [127][Df70, Df60]

Productos relacionados:
Service Manual DF70, DF60 Tiller Handle (Df70Wth) [127][Df70, Df60]
99500-99E13-01E
Suzuki Marine

TILLER HANDLE BRACKET

The tiller handle bracket has been changed in shape and related parts.
Install the spring washers with direction as shown in figure.

Installation

  1. Install the tiller handle bracket and related parts in position.

Apply the thread lock to the tiller handle pivot bolt.

99000-32050: THREAD LOCK “1342”

• Apply the water resistant grease to the bush.
99000-25161: SUZUKI WATER RESISTANT GREASE

  1. The tiller handle pivot bolt is tightened first to the specified
    torque.

Tiller handle pivot bolt: 25 N·m (2.5 kg-m, 18.0 lb-ft)

  1. Then the tiller handle pivot nut is tightened to the specified torque.

Tiller handle pivot nut: 45 N·m (4.5 kg-m, 32.5 lb-ft)

Installation on steering bracket

Tiller handle mounting lock nut: 50 N·m (5.0 kg-m, 36.0 lb-ft)
Tiller handle mounting stud bolt: 25 N·m (2.5 kg-m, 18.0 lb-ft)

TILLER HANDLE

The method of fixing the clutch cable and the throttle cable changed.
The clutch cable and throttle cable are fixed with the cable bracket.

Share on social:

Productos relacionados