ENGINE BREAK-IN
WARM-UP RECOMMENDATION
THROTTLE RECOMMENDATION
Avoid maintaining a constant engine speed for an extended period at any time during the engine break-in by varying the throttle position occasionally.
- FIRST 2 HOURS
For first 15 minutes, operate the engine in-gear at idling speed.
During the remaining 1 hour and 45 minutes, operate the engine in-gear at less than 1/2 (half) throttle (3 000 r/min).
The throttle may be briefly opened beyond the recommended setting to plane the boat, but must be reduced to the recommended setting immediately after planing.
- NEXT 1 HOUR
Operate the engine in-gear at less than 3/4 (three-quarter) throttle (4 000 r/min).
- LAST 7 HOURS
Operate the engine in-gear at desired engine speed.
However, do not operate continuously at full throttle for more than 5 minutes.
