UPPER AND LOWER MOUNT
The upper mount washer (mount side) has been changed in outside diameter from 22 mm to 24 mm.
The upper mount washer (nut side) and lower mount washer have been changed in thickness from 2.5 mm to 3.0 mm.

LOWER MOUNT COVER
The method of installing the upper mount cover has been changed from four 8 mm bolts to two 10 mm bolts. The lower mount cover and cover cap have been incorporated and changed in shape.
In accordance with this change, the lower mount cover cap, pin, spring and screw have been eliminated and the bolt has been changed.
The upper mount cover bolt tightening torque has been changed to 50 N·m with applying the thread lock.
Lower mount cover bolt: 50 N·m (5.0 kg-m, 36.0 lb-ft)
99000-32050: THREAD LOCK “1342”

DRIVESHAFT HOUSING
- In accordance with the change of lower mount cover, the driveshaft housing has been changed in shape.

- The bonding wires routing have been changed.

*The boss for water tube has been eliminated.

