DRIVESHAFT
The driveshaft has been changed in shape.
In accordance with this change, the washers pre-loading to driveshaft have been eliminated.

In accordance with this change, the servicing procedure for “Back-up Shim Adjustment” has been changed.
PINION GEAR BACK-UP SHIM
The pinion gear back-up shim has been added. Available thickness: 0.50 mm, 0.55 mm
LOWER UNIT GEARS-SHIMMING AND ADJUSTMENT
If the lower unit has been rebuilt or has had components replaced, shimming for correct gear contact and backlash will have to be adjusted to ensure smooth, reliable operation of gears.

Shim/Washer & Mounting position
| Numerical index/item | Available thickness(mm) | Design specification thickness(mm) | |
|---|---|---|---|
| (1) | Pinion gear back-up shim | 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 1.00, 1.05, 1.10, 1.15 | 1.00 |
| (2) | Forward gear back-up shim | 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90 | 1.00 |
| (3) | Forward gear thrust washer | 3.0 | 3.0 |
| (4) | Reverse gear thrust washer | 0.9, 1.0, 1.2, 1.3, 1.4. 1.6 | 2.2 |
| (5) | Reverse gear back-up shim | 1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6 | 1.5 |
