UPPER MOUNT
The upper mount and related parts have been changed as follows:
• The upper mount bolt has been changed from M10 to M12.
• The inner tube of the upper mount has been changed in material and dimension.
• The through holes in the upper mount have been eliminated.
• The nut, washers and upper thrust stopper have been changed.
• The through holes in the steering bracket have been enlarged.
• The mount nut tightening torque has been changed to 80 N·m with applying the thread lock
99000-32020: THREAD LOCK SUPER “1333B”
Upper mount nut: 80 N•m (8.0 k•gm, 58.0 lb•ft)

