Replacing propeller shaft oil seal
- Extract the seals with oil seal remover.

09913-50121 : Oil seal remover
Apply Water Resistant Grease to the inner circumference of the housing.
Using an oil seal installer, drive the two oil seals (one at a time) into the propeller shaft bearing housing.
The lipped portion of the seal must face towards the propeller.
Apply Water Resistant Grease to the seal lips.

SHIFT ROD AND SHIFT CAM
● Inspect the “stepped” surfaces of the shift cam.
Replace if chipped, damaged or excessively worn.
● Inspect shift rod guide. Replace if pitted, stiff or corroded.
● Inspect O-ring. Replace if nicked, cut or torn.
● Inspect shift rod boot. Replace if cracked or damaged.

WATER PUMP AND RELATED ITEMS
WATER PUMP AND RELATED ITEMS
● Inspect impeller. Replace if vanes are cut, torn or worn.
● Inspect pump case. Replace if cracked, distorted or corroded.
● Inspect under panel. Replace if cracked, distorted or corroded.

