SERVICE DATA

POWERHEAD

** Figures shown are guidelines only, not absolute service limits.
ENGINE OIL PUMP


CYLINDER HEAD/CAMSHAFT

- On DF40 designated for EU market (E01), specifications of cam height are the same as the specifications for DF50.

VALVE/VALVE GUIDE


CYLINDER/PISTON/PISTON RING


CRANKSHAFT/CONROD

LOWER UNIT
Design specification thickness for shim & washer.
| Pinion gear back-up shim | mm (in) | 1.0 (0.04) |
|---|---|---|
| Forward gear back-up shim | mm (in) | 1.0 (0.04) |
| Forward gear thrust washer | mm (in) | 2.0 (0.08) |
| Reverse gear thrust washer | mm (in) | 2.0 (0.08) |
| Reverse gear back-up shim | mm (in) | 1.0 (0.04) |

ELECTRICAL

STARTER MOTOR

PTT MOTOR

SELF-DIAGNOSTIC SYSTEM INDICATION
When the abnormality occurs in a signal from sensor, switch, etc., the “CHECK ENGINE” lamp on the monitor-tachometer flashes (lights intermittently) according to the each code pattern with buzzer sounding.

• If more than two items fail at once, the self-diagnostic indication appears according to priority order. The indication repeats three times.
• On the tiller handle (QH and TH) model, alerts is signaled by a sound from the caution buzzer contained in the tiller handle.
