SERVICE DATA

POWERHEAD

- For serial no. DF40-031586 and later models, DF50-031526 and later models.
** Figures shown are guidelines only, not absolute service limits.
ENGINE OIL PUMP

CYLINDER HEAD/CAMSHAFT


VALVE/VALVE GUIDE


CYLINDER/PISTON/PISTON RING

- For serial no. DF40-031716 and later models, DF50-031700 and later models

CRANKSHAFT/CONROD

LOWER UNIT
Design specification thickness for shim & washer.
| Pinion gear back-up shim | mm (in) | 1.0 (0.04) |
|---|---|---|
| Forward gear back-up shim | mm (in) | 1.0 (0.04) |
| Forward gear thrust washer | mm (in) | 2.0 (0.08) |
| Reverse gear thrust washer | mm (in) | 2.0 (0.08) |
| Reverse gear back-up shim | mm (in) | 1.0 (0.04) |

ELECTRICAL

STARTER MOTOR

PTT MOTOR

SELF-DIAGNOSTIC SYSTEM INDICATION
When the abnormality occurs in a signal from sensor, switch etc., the “CHECK ENGINE” lamp on the monitor-tachometer flashes (lights intermittently) according to the each code pattern with buzzer sounding.

• If more than two items fail at once, the self-diagnostic indication appears according to priority order. The indication repeats three times.
• On the tiller handle (QH) model, alerts is signaled by a sound from the caution buzzer contained in the tiller handle
