¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Service Manual DF40, DF50 Removal Inspection Installation [147][Df40, Df50]

Productos relacionados:
Service Manual DF40, DF50 Removal Inspection Installation [147][Df40, Df50]
99500-87J08-01E
Suzuki Marine

THERMOSTAT


REMOVAL

  • Disconnect water hose (1) from thermostat cover.
  • Remove the four (4) bolts (2) securing the thermostat cover, then remove the cover (3) and thermostat (4).


INSPECTION

  • If salt deposits, corrosion, wear or other damage is found, clean or replace.

  • Thermostat operation
    Check thermostat opening temperature as follows :

  • Insert a length of thread between thermostat valve / body and suspend thermostat in a container filled with water.

  • Place thermometer in container and heat water.

    Observe water temperature when thermostat valve opens and releases thread.

Thermostat operating temperature
Standard : 48 – 52 °C (118 – 126 °F)


INSTALLATION
Installation is reverse order of removal with special attention to the following steps.

  • Assemble thermostat (1), gasket (2) and thermostat cover (3) to cylinder head block and secure with bolts.
Share on social:

Productos relacionados