¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Service Manual DF40, DF50 Ptt Motor Relay [293][Df40, Df50]

Productos relacionados:
Service Manual DF40, DF50 Ptt Motor Relay [293][Df40, Df50]
99500-87J08-01E
Suzuki Marine

SWIVEL BRACKET BUSH

The swivel bracket bush has been changed in shape.

TILLER HANDLE ASSY

The wire connector of the tiller handle assy has been changed to 16-pin connector.

PTT MOTOR RELAY

The PTT relays (for UP and for DOWN) have been incorporated and changed in shape.

In accordance with the change of PTT relay, the lead connector of PTT motor and lead grommet have been changed.

PTT MOTOR RELAY

INSPECTION

  1. Disconnect battery cable from battery.

  2. Disconnect all cables/lead wires from PTT relay.

  3. Check resistance between each two (2) lead wires.

Between “P” wire and “B” wire: 25 – 37 Ω
Between “Lbl” wire and “B” wire: 25 – 37 Ω

  1. Connect “R” wire to positive (+) terminal, and black wire to negative (-) terminal of 12 V battery.

Each operation test must be performed within 3 – 5 seconds to avoid overheat damage to the relay coil.

  1. Temporarily connect a jumper wire from the “P” lead wire to the battery positive + terminal, then check voltage between “G” wire and “B” wire.

Between “G” wire and “B” wire: 12 V (Battery voltage)

  1. Temporarily connect a jumper wire from the “Lbl” lead wire to the battery positive + terminal, then check voltage between “Bl” wire and “B” wire.

Between “Bl” wire and “B” wire: 12 V (Battery voltage)

  1. If inspection in step 3 and/or step 5, 6 fails, replace PTT relay.
Share on social:

Productos relacionados