¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Service Manual DF40, DF50 Pre-Programmed Value For Fail-Safe System [68][Df40, Df50]

Productos relacionados:
Service Manual DF40, DF50 Pre-Programmed Value For Fail-Safe System [68][Df40, Df50]
99500-87J08-01E
Suzuki Marine

FAIL-SAFE SYSTEM

The fail-safe system is closely related to the self-diagnostic system.

When an abnormality occurs in a sensor signal, the ECM ignores the out-of-range signal and assumes a pre-programmed value for the failed sensors.

This allows the engine to continue running under the fail-safe condition.

PRE-PROGRAMMED VALUE FOR FAIL-SAFE SYSTEM

FAILED ITEM PRE-PROGRAMMED VALUE
MAP sensor 1 • 319 – 475 mmHg (Correspond to approx. 750 – 4000 r/min) [NOTE 1]
CMP sensor • Fuel Injection:
1 simultaneous injection for all cylinders per 2 crankshaft rotations
• Ignition Timing:
Fixed at BTDC 5° ignition timing
Cylinder temp. sensor 60 °C (140 °F)
IAT sensor 45 °C (113 °F)
Exhaust manifold
temp sensor
60 °C (140 °F)

There is no back-up system for the ECM itself. The engine will stop if it has failed.

This value will change according to the current engine speed.

Share on social:

Productos relacionados