INSPECTION


Oil seal
Check oil seal lip for wear or other damage.
Replace as necessary.

Oil pump components
Check outer and inner rotors, rotor plate and oil pump case for excessive wear or damage.
Replace as necessary.
MEASURING PUMP COMPONENTS

Radial clearance
Using a feeler gauge, measure radial clearance between outer rotor and case.
Radial clearance :
Service limit : 0.31 mm (0.012 in.)
If measurement is not within specifications, replace the outer rotor and/or case.
Side clearance
Using straightedge and feeler gauge, measure side clearance.
Side clearance
Service limit : 0.15 mm (0.006 in.)
If measurement is not within specifications, replace the outer rotor and/or pump case.
