¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Service Manual DF40, DF50 Installation [121][Df40, Df50]

Productos relacionados:
Service Manual DF40, DF50 Installation [121][Df40, Df50]
99500-87J08-01E
Suzuki Marine

Installation

  1. Remove two bolts and high pressure fuel filter (13).
  2. Disconnect lead wire connectors (14) from all fuel injectors.

  1. Remove four (4) bolts and Throttle body (15).

Remove IAC valve hose (16) from Throttle body.

  1. Remove bolts and nuts, and then remove intake manifold assembly (17).

INSTALLATION

Installation is reverse order of removal with special attention to the following steps.

Do not re-use gasket once removed. Always use a new gasket.

  • Apply the bond to both mating surfaces of the intake manifold gasket.

99000-31140 : Suzuki Bond 1207B

  • Tighten bolts and nuts securely.

Intake manifold bolt & nut :
  6 mm 11N•m (1.1 kg⋅m, 8.0 lb⋅ft.)
  8 mm 23N•m (2.3 kg⋅m, 16.5 lb⋅ft.)

  • Check to ensure that all removed parts are back in place.

Checking

  • Check fuel and water hose routing. (See page 10-7 to 10-9)
  • Check wire routing (See page 10-1 to 10-6)
  • Check for fuel leakage. (See page 5-3)
  • Check for water leakage.
Share on social:

Productos relacionados