Step 1: INSPECTION
If any component is found to be excessively worn, cracked, defective or damaged in any way, it must be replaced.
BUSHINGS

Check all bushings.
If excessive wear or other damage is found, replace bushing.
If bushing fit is loose when installing, replace bushing.
OIL SEAL

Check swivel bracket seal.
If excessive wear or other damage is found, replace seal.
CLAMP BRACKET SHAFT

Check clamp bracket shaft.
If clamp bracket shaft is bend or twisted, replace shaft.
BRACKET

Check clamp brackets, steering bracket and swivel bracket.
If cracks or other damage is found, replace bracket (s).
