IGNITION SYSTEM
The ignition system used by the DF40/DF50 is a fully transistorized, electronic microcomputer timing ad vanced type.
On this system, power is totally supplied from the battery with the ECM controlling all ignition timing functions. The ignition system is composed of the ignition coil, spark plug and components for system control (ECM, sensor,switch etc.)
When the ignition switch is “ON”, battery voltage (12V) is applied to the circuit as shown in the illustration. At the calculated time of ignition, the transistor in the ECM turns “OFF”, breaking the ground circuit.
In this way, a mutual induction high voltage occurs in the ignition coil secondary side and spark is generated.

IGNITION CONTROL SYSTEM
OUTLINE
Sensors at specific points on the engine monitor current engine conditions and send signals to the ECM. Based on these signals, the ECM determines the optimum ignition timing and releases voltage to the ignition coils.

