¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Service Manual DF40, DF50 Ignition System [231][Df40, Df50]

Productos relacionados:
Service Manual DF40, DF50 Ignition System [231][Df40, Df50]
99500-87J08-01E
Suzuki Marine

IGNITION SYSTEM

IGNITION TIMING CHART

• The following chart shows example for ignition at BTDC24°.
• The ignition timing is varied by the condition of engine running.
• Angles indicated in the following chart show CRANKSHAFT angle.

CONTROL MODE

WHEN CRANKING :
The ignition timing is fixed at BTDC 7° until the engine starts.

WHEN IDLING / TROLLING :
The ignition timing is controlled to within the range of ATDC 1° to BTDC 17° to provide stable engine operation
at the specified idling / trolling speed.
When the shift lever is in neutral, if engine speed exceeds 1200 r / min , ignition timing remains fixed at BTDC 9°.
WHEN RUNNING (NORMAL OPERATION) :
The ignition timing ranges between BTDC 0° – 27° (DF40) or 24° (DF50), depending on current engine operating conditions.
WHEN DECELERATING :
When the throttle valve is closed suddenly, turning the CTP switch “ON”, ignition timing is delayed for a programmed duration to prevent engine stalling or unstable running.

SPECIFICATION

Share on social:

Productos relacionados