GEAR OIL
Change initially after 20 hours (1 month) and every 100 hours (6 months) thereafter.
(1) Place the outboard motor upright on a level surface.
(2) Place a container under the lower unit.
(3) Remove the lower gear oil drain plug before the gear oil level plug and drain the gear oil.

(4) Fill with the recommended gear oil through the oil drain hole until oil just starts to flow out from the oil level hole.

Gear oil amount : 610 ml ( 20.6 / 21.5 US / Imp. oz)
Recommended oil :
Suzuki Outboard Motor Gear Oil or SAE # 90
Hypoid gear oil
(5) Install the oil level plug before removing the oil filler tube from the drain hole.
(6) Install the oil drain plug
Do not re-use gaskets. Always use a new gasket
To avoid insufficient injection of gear oil, check the oil gear level 10 minutes after doing the procedure in the step (6). If the oil level is low, slowly inject the gear oil up to the correct level.
