¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Service Manual DF40, DF50 Gear [186][Df40, Df50]

Productos relacionados:
Service Manual DF40, DF50 Gear [186][Df40, Df50]
99500-87J08-01E
Suzuki Marine

GEAR

• Inspect forward, reverse and pinion gear teeth and engaging dogs.
Replace gears if damaged or worn.

• Inspect forward gear bearing. Replace bearing if pitted, noisy or rough.

PROPELLER SHAFT COMPONENTS

• Inspect push rod, replace if worn, broken, or tip is flattened. Inspect clutch dog shifter. Replace if chipped, worn or damaged.

• Inspect dog pin. Replace if bent or worn.

• Inspect propeller shaft / splines. Replace if worn, twisted or damaged.

• Check clutch return spring by measuring its free length.

• If free length is not within specifications, replace the return spring.

Clutch return spring free length (L)
Standard : 62 mm (2.44 in.)
Service limit : 60 mm (2.36 in.)

PROPELLER SHAFT BEARING HOUSING

• Inspect housing. Replace if cracked or damaged.

• Inspect reverse gear bearing. Replace bearing if pitted, noisy or rough.

• Inspect bearing. Replace bearing if pitted, noisy or rough.

• Check condition of oil seal and O-ring.
Replace the seals if nicked, cut or worn.

Share on social:

Productos relacionados