ELECTRONIC FUEL INJECTION SYSTEM
The fuel injection system used by the DF40/50 is a speed-density, multi-point, sequential, electronic fuel injection type.
The fuel injection system is composed of the fuel line components, air intake components , and components for system control (ECM,sensors, switches, etc.).
FUEL INJECTION CONTROL SYSTEM
OUTLINE
The sensors monitor current engine condition and send signals to the ECM. Based on these signals, the ECM determines the optimum fuel injection time duration (fuel amount) and fuel injection timing (multi- point sequential timing) and controls the injector operating signals accordingly.
Fuel injection start timing is set at BTDC 545° on exhaust stroke constant.


