¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Service Manual 5008740_200-300 HP 90 ° V Gearcase [Shift Rod Adjustment]

Productos relacionados:
Service Manual 5008740_200-300 HP 90 ° V Gearcase [Shift Rod Adjustment]
5008740
BRP Marine

Gearcase

On 25 in. and 30 in. models, place the appropriate water tube spacer and grommet on the impeller housing cover.

  1. Spacer

  2. Grommet

After water pump is assembled completely, rotate driveshaft counter clockwise 1/4 turn to unlock and release impeller and key from driveshaft.

Next, pull up on driveshaft and turn clockwise to lock impeller to shaft. This process increases pump efficiency by locking the impeller lower on the driveshaft.

Before installing gearcase, shift rod adjustment MUST be checked. Refer to SHIFT ROD ADJUSTMENT on p. 295.

SHIFT ROD ADJUSTMENT

Check the shift rod height from the shift rod hole to the surface of the gearcase using Universal Shift Rod Height Gauge, P/N 389997.

With the gearcase in NEUTRAL , rot ate the shift rod up or down as necessary for correct adjustment. Once correct height is achieved, rotate rod one half turn or less to direct offset forward.

IMPORTANT: The NEUTRAL detent is a two step design. Make sure the NEUTRAL detent ball is in the center step before checking shift rod height.

Shift Rod Heights

Model Type Height
20 in. (L) “L2”“M2” 21 29/32 in.(21.906 in./ 556 mm)± 1/2 Half Turn
25 in. (X) “L2”“M2” 26 29/32 in.(26.906 in./ 683 mm)± 1/2 Turn
30 in. (Z) “M2” 31 29/32 in.(31.906 in./ 810 mm)± 1/2 Turn
Share on social:

Productos relacionados