¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Service Manual 5007215_Evinrude E-TEC 200-250 HP Cooling System [Pressure Relief Valve Servicing]

Productos relacionados:
Service Manual 5007215_Evinrude E-TEC 200-250 HP Cooling System [Pressure Relief Valve Servicing]
5007215
BRP Marine

PRESSURE RELIEF VALVE SERVICING

The pressure relief valve assembly should be serviced at the same time as the thermostats.

Disassembly

Remove hose clamps and hoses from pressure valve.

  1. Hoses

Remove screws securing the bracket to powerhead. Remove the pressure valve housing.

Remove the bracket and the cap from the housing. Remove the pressure valve assembly.

  1. Bracket
  2. Cap

Inspection

Inspect all components for cracks, heat damage, or signs of corrosion. Replace damaged components. Clean all debris from pressure relief valve components.

Assembly

Assembly is essentially the reverse of disassembly.
Pay close attention when performing the following additional tasks.

Torque bracket and cap screws to 60 to 84 in. lbs. (7 to 9.5 N-m).

Install valve on powerhead. Torque nuts to 60 to 84 in. lbs. (7 to 9.5 N-m).

Install hoses and secure with clamps.

Share on social:

Productos relacionados