¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Service Manual 40-90 HP Manual Starter [Recoil Starter Removal]

Productos relacionados:
Service Manual 40-90 HP Manual Starter [Recoil Starter Removal]
5008328
BRP Marine

Recoil Starter Removal

To prevent accidental starting while servicing, twist and remove all spark plug leads.

Remove the clamp holding the oiling system wiring harness.

Remove the three starter housing screws and washers.


002515

  1. Clamp
  2. Starter housing screws (3)

Lift starter housing from outboard.

Remove three screws and remove starter ratchet from flywheel.


006483

  1. Ratchet

Recoil Starter Disassembly

Wear safety glasses while disassembling and assembling manual starters because of rewind spring tension.

Pull the starter rope out far enough to tie a slip knot in the rope. Remove the end of the starter rope from the handle anchor and remove the handle. Release the slip knot and ease the rope back in until the rewind spring is fully unwound. If necessary, remove the starter handle bracket from the starter housing.


007853

  1. Slip knot
  2. Rope anchor

Remove the rope guide and pulley support from the starter housing.


007854

  1. Rope guide
  2. Pulley support
Share on social:

Productos relacionados