¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Service Manual 200-300 HP E-TEC Gearcase [Gearcase Housing Inspection]

Productos relacionados:
Service Manual 200-300 HP E-TEC Gearcase [Gearcase Housing Inspection]
5007820
BRP Marine

Gearcase Housing Inspection

Remove propeller shaft assembly from gearcase.


006839

Water Intake Screens

Remove and clean water intake screens. Replace if damaged.


006886

  1. Water intake screen

Thoroughly clean gearcase housing to remove all dirt and debris prior to inspection. Inspect pinion bearing and forward thrust surface of gearcase housing.

Use Gearcase Alignment Gauge Kit, P/N 5006349 to check the condition of gearcase housing prior to reassembly. Refer to instructions provided with kit. Use additional Gauging Head as follows:

  • P/N 5007750, for “L2” Type gearcase housings
  • P/N 5007749, for “M2” Type gearcase housings


006787

IMPORTANT: DO NOT force gauging shaft into alignment hole. Shaft MUST slide easily into hole of gauging head. If shaft does not slide into hole, gearcase housing is damaged and must be replaced.


004347

  1. Gauging shaft
Share on social:

Productos relacionados