Removal
Removal
Note where the index mark on the gearcase aligns with the index mark of the adjustable trim tab so the trim tab can be installed in the same position.
- Index marks 007651
Remove the trim tab retaining screw and trim tab from the gearcase.
- Trim tab retaining screw 007652
Installation
Apply Gasket Sealing Compound to threads of the trim tab screw. Install and align the trim tab with the index marks noted prior to disassembly. Tighten the trim tab screw to a torque of 60 to 84 ft. lbs. (7 to 9.5 N·m). For adjustment, refer to Trim Tab Adjustment on p. 66.
GEARCASE REMOVAL AND INSTALLATION
Gearcase Removal
To prevent accidental starting while servicing, twist and remove all spark plug leads. During service, the outboard may drop unexpectedly. Avoid personal injury; always support the outboard’s weight with a suitable hoist or the tilt support bracket during service.
Remove water intake screens.
Water intake screen 007649
Remove the upper shift rod connector screw.
- Shift rod connector screw 007650
