Troubleshooting
Before troubleshooting the power unit, check that all electrical connections are tight and free from corrosion, and that the battery is fully charged to 12 V.
Symptom: Engine does not crank.
- Check the starting system.
- Check the power unit.


Symptom: Engine cracks, but will not start.
- Check the ignition system.
- Check the fuel system.
- Check the compression pressure of power unit.

WARNING
- Do not touch any of the connections of the spark gap tester leads.
- Do not let sparks leak out of the removed spark plug caps.
- Keep flammable gas or liquids away, since this test can produce sparks.
Symptom: Engine can be started, but does not remain on.
- Check the fuel system.
- Check the ignition system.
- Check the compression pressure of power unit.


Symptom: The engine idle speed is not steady, but increases or decreases.
- Check the carburetors.
- Check the air intake system.
- Check the ignition system

Symptom: Engine does not accelerate when the throttle is opened quickly.
The engine turns off when the throttle is opened quickly.
Acceleration is tardy and the engine is likely to stop at any moment.
- Check the carburetors.
- Check the ignition system.
- Check the compression pressure of power unit.

Symptom: Engine can run, but engine speed will not increase.
Overheat warning indicator is on.
Oil pressure warning indicator is on.
Warning indicator is on and buzzer is sounding.
- Check the water cooling system.
- Check the lubricating system.


