¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Periodic Inspection And Adjustment [Lower Unit:Bracket Unit] [1996]

Productos relacionados:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1996 150hp All
Yamaha Outboard 1996 175hp All
Yamaha Outboard 1996 200hp All
Yamaha Outboard 1996 225hp All
Yamaha Outboard 1996 250hp All

Periodic Inspection And Adjustment [Lower Unit:Bracket Unit] [1996]
LIT-18616-01-41
Yamaha Marine

LOWER UIMIT/BRACKET UNIT

Pressure tester: YB-03595/90890-06762

  • Apply the specified pressure

Pressure: 100 kPa (1.0 kg/cm2,14.2 psi)

  • Check that the pressure is held as specified for 10 seconds.

NOTE:
Do not over-pressurize. Excess pressure may cause the air to leak out.

BRACKET UNIT

Cowling hook adjustment

  1. Inspect:
  • Cowling lock and release
    Weak engagement -> Adjust

Adjustment steps:

  • Remove the top cowling.
  • Loosen the bolts by approximately a quarter turn.
  • Tap the end of the hook to make an approximate adjustment.

Moving the hook towards the seal -> Loosen the cowling.

Moving the hook away from the seal -> Tighten the cowling.

  • Tighten the bolts
Share on social:

Productos relacionados