PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Owner's Manual DF70AT-TH, DF90AT-TH, DF90A, DF70A Troubleshooting

Productos relacionados:
Owner's Manual DF70AT-TH, DF90AT-TH, DF90A, DF70A Troubleshooting
99011-87L60-03B
Suzuki Marine

Owner's Manual

If not equipped with Keyless Start System:

Ignition Key Number:

EMISSION CONTROL INFORMATION

• THIS ENGINE IS CERTIFIED TO OPER ATE ON UNLEADED GASOLINE OF 87 OCTANE ((R+M)/2 METHOD) OR GREATER.
• EXHAUST EMISSION CONTROL SYSTEM:
ECM, MFI

TROUBLESHOOTING

This troubleshooting guide is provided to help you find the cause of common complaints.

Failure to troubleshoot a problem correctly can damage your outboard motor. Improper repairs or adjustments may damage the outboard motor instead or fixing it. Such damage may not be covered under warranty.
If you are not sure about the proper action to correct a problem, consult your Suzuki marine dealer.

Starter motor will not operate:

  • Shift lever is not in NEUTRAL.

  • Fuse is blown out.

  • Emergency stop switch lock plate is not in position.

Engine will not start (hard to start):

  • Fuel tank is empty.

  • Fuel hose is not properly connected to engine.

  • Fuel hose is kinked or pinched.

  • Spark plug is fouled.

Engine idles unstably or stalls:

  • Fuel hose is kinked or pinched.

  • Spark plug is fouled.

Engine speed will not increase (Engine power is low):

  • Engine is overloaded.

  • Caution/Diagnosis system is activated.

  • Propeller is damaged.

  • Propeller is not properly matched to loads.

Engine vibrates excessively:

  • Engine mounting bolts or clamp screws are loose.

  • Foreign object (seaweed etc.) is tangled on propeller.

  • Propeller is damaged.

Engine overheats:

  • Cooling water intake(s) are blocked.

  • Engine is overloaded.

  • Propeller is not properly matched to loads.

The Keyless Start System does not turn ON even when the main switch is operated. The error sound (five short buzzer beeps) is NOT heard: (If equipped with Keyless Start System)

  • Emergency stop switch lock plate is not in position.

  • The main switch has been operated continuously while the communication with the key fob is disabled.

  • Battery terminal connection is corroded or lost.

  • Battery power is lost.

  • Keyless control unit failure.

  • Electric wiring connection is loose.

  • Remote control box failure. (Side mount type)

  • Main panel failure. (Top mount type)

The Keyless Start System does not turn ON even when the main switch is operated. The error sound (five short buzzer beeps) IS heard: (If equipped with Keyless Start System)

  • Key-fob is outside the operating range.

  • Key-fob battery is dead.

  • Key-fob is in OFF mode.

  • The key-fob is not authenticated.

  • Communication failure due to strong radio wave or noise.

  • Electric wiring connection failure between the keyless control unit and outboard motor.

  • Authentication error between the keyless control unit and outboard motor.

  • Abnormality exists in the electronic control system of the engine.

The Keyless Start System does not turn OFF even when the main switch is operated:

  • Electric wiring connection is loose.

  • Remote control box failure. (Side mount type) (cid:129) Main panel failure. (Top mount type)

FUSE

  1. If equipped with Keyless Start System: Turn the Keyless Start System OFF.

If not equipped with Keyless Start System: Turn the ignition key to the “off” position.

  1. Remove the motor cover.

  2. Remove the fuse box cover and pull off the fuse.

Use the fuse puller at the back of fuse box cover, when the fuse is pulled off and installed.

  1. Inspect the fuse and replace with new fuse if needed.

If a fuse is blown, try to determine the root cause and correct it.
If the cause is not corrected, the fuse may be blown again.

If you replace a blown fuse with a fuse having a different amperage rating or with a substitute such as aluminum foil or a wire, extensive electrical system damage and a fire may result.
Always replace a blown fuse with a fuse of the same type and rating.

If a new fuse blows in a short time after installation, you may have a major electrical system problem.
Consult your SUZUKI marine dealer.

(1) Main fuse: 40A

(2) Spare fuse: 30A

(3) Spare fuse: 10A

(4) Starter motor relay fuse: 30A

(5) PTT switch fuse: 10A

(6) Ignition coil/Injector/ECM/Fuel pump fuse: 30A

(7) IAC fuse: 10A

(8) Spare fuse: 40A

Share on social:

Productos relacionados