¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Owner's Manual DF60 Motor Removal And Transporting

Productos relacionados:
Owner's Manual DF60 Motor Removal And Transporting
99011-99E11-03A
Suzuki Marine

Step 1: MOTOR REMOVAL

If it is necessary to remove the outboard motor from your boat, we recommend that you ask your authorized Suzuki Marine Dealer to do the work for you.

Step 2: MOTOR TRANSPORTING

When transporting the motor, place the motor either vertically or horizontally.

Vertical transport:

Attach the clamp bracket to a stand by securing two transom bolts.

Horizontal transport:

  1. Drain the engine oil. Refer to the ENGINE OIL section.

  2. Drain the gasoline from the vapor separator.
    Consult your authorized Suzuki Marine Dealer.

  1. Rest the motor on a case protector with the port (flush plug) side downwards as shown.

• Do not rest the engine before the engine oil has drained, as oil may enter the cylinder from the sump or outer casings may be damaged.
• Do not rest the engine before the cooling water has drained completely, as water may enter the cylinder through the exhaust port and cause problems.

Do not let the lower unit of the outboard sit higher than the power head during transporting or storing, or water may trickle into the power head, causing damage to the engine.

Share on social:

Productos relacionados