SPECIAL TOOLS
The use of correct special tools recommended by Yamaha will aid the work and enable accurate assembly and tune-up. Improvisations and use of improper tools can cause damage to the equipment.
SPECIAL TOOLS FOR TUNE-UP
| NO. | TOOL NAME | PART NO. |
|---|---|---|
| 1 | Test propeller (115, 130) (115-225) | YB-1624 YB-1626 |
| 2 | Throttle sensor adjusting lead (225) | YB-06443 |
| 3 | Lower unit pressure/vacuum tester | YB-35956 |
| 4 | Timing light | YM-33277-A |
| 5 | Vernier caripers (0-200 mm) | YU-3005 |
| 6 | Micrometer (75-100 mm) | YU-3009 |
| 7 | Cylinder bore gauge (50-100 mm) | YU-3017 |
| 8 | Dial indicator | YU-3097 |
| 9 | Tachometer | YU-8036-A |
| 10 | Pocket tester | YU-03112-C |
| 11 | Feeler gauge (in) | YU-26900-8 |
| 12 | Feeler gauge (mm) | YU-26900-9 |
| 13 | Magnetic flexible dial base | YU-34481 |
| 14 | Digital multimeter | YU-34899-A |
SPECIAL TOOLS FOR POWER UNIT SERVICE
| NO. | TOOL NAME | PART NO. |
|---|---|---|
| 1 | Driver handle | YB-6071 |
| 2 | Universal puller | YB-6117 |
| 3 | Flywheel magneto holder | YB-6139 |
| 4 | Oil seal installer | YB-6195 |
| 5 | Engine lifting hook | YB-6202 |
| 6 | Crankshaft bearing installer | YB-6205 |
| 7 | Bearing splitter plates | YB-6219 |
| 8 | Piston ring compressor | YU-33294 |
SPECIAL TOOLS FOR LOWER UNIT SERVICE
| NO. | TOOL NAME | PART NO. |
|---|---|---|
| 1 | Bushing installer (150-225) | YB-6029 |
| 2 | Driver handle | YB-6071 |
| 3 | Slide hammer | YB-6096 |
| 4 | Universal puller | YB-6117 |
| 5 | Needle bearing installer and remover | YB-6194 |
| 6 | Oil seal installer | YB-6195 |
| 7 | Needle bearing installer and remover | YB-6196 |
| 8 | Roller bearing installer (115, 130) | YB-6199 |
| 9 | Needle bearing and tapered roller bearing installer | YB-6200 |
| 10 | Drive-shaft holder | YB-6201 |
| 11 | Bearing housing puller (Hook) | YB-6207 |
| 12 | Drive-shaft needle bearing depth stopper (115, 130) | YB-6213 |
| 13 | Bearing splitter | YB-6219 |
| 14 | Bearing installer (150-225) | YB-6246 |
| 15 | Drive shaft needle bearing depth stopper (150-225) | YB-6247 |
| 16 | Bearing installer (150-225) | YB-6258 |
| 17 | Backlash indicator gauge | YB-6265 |
| 18 | Backlash adjusting plate | YB-7003 |
| 19 | Pinion shim selecting tool (shim gauge) | YB-34432-B |
| 20 | Forward gear shim selecting tool (height gauge) | YB-34446 |
| 21 | Grand nut wrench | YB-34447 |
| 22 | Drive-shaft puller | YB-34449-A |
| 23 | Revers gear shim gauge | YB-34468-A |
| 24 | Magnetic flexible dial base | YU-34481 |
SPECIAL TOOLS FOR COUNTER ROTATION MODEL - LOWER UNIT SERVICE
| NO. | TOOL NAME | PART NO. |
|---|---|---|
| 25 | Propeller shaft puller | YB-6335 |
| 26 | Bearing race installer (L150, L200) | YB-6336 |
| 27 | Needle bearing installer (L130) | YB-6337 |
| 28 | Needle bearing remover (L130) | YB-6376 |
| 29 | Needle bearing installer attachment (L130) | YB-6377 |
| 30 | Bearing installer (L130) | YB-6378 |
| 31 | Bearing installer (L130) | YB-6430 |
SPECIAL TOOLS FOR POWER TRIM AND TILT SERVICE
| NO. | TOOL NAME | PART NO. |
|---|---|---|
| 1 | Trim and tilt cylinder wrench | YB-6175-1A, YB-6175-1B |
| 2 | Trim and tilt oil pressure gauge | YB-6181 |
| 3 | Union seat seal installer | YB-6188 |
SPECIAL TOOLS FOR ELECTRICAL COMPONENTS SERVICE
| NO. | TOOL NAME | PART NO. |
|---|---|---|
| 1 | Flywheel magneto holder | YB-6139 |
| 2 | Flywheel magneto puller | YB-6117 |
| 3 | C.D.I. tester | YU-91022-B |
SEALING AGENTS AND LUBRICANTS
| NO. | TOOL NAME | PART NO. FOR U.S.A. | PART NO. FOR CANADA |
|---|---|---|---|
| 1 | Gasket maker | 907-90740-01-00 | 90790-74001-00 |
| 2 | Marine grease | LUB-GREAS-14-00 | 90890-69910-00 |
| 3 | Power trim and tilt fluid | LUB-PWRTF-11-00 | — |
| 4 | Gear case lube | LUB-GEARL-11-00 | ACC-11000-85-00 |
| 5 | Yamalube two cycle outboard oil | ACC-11000-07-01 | ACC-11000-20-01 |
