SPECIAL TOOLS
The use of correct special tools recommended by Yamaha will aid the work and enable accurate assembly and tune-up. Improvisations and use of improper tools can cause damage to the equipment.
SPECIAL TOOLS FOR TUNE-UP
| NO. | TOOL NAME | PART NO. |
|---|---|---|
| 1 | Compression gauge | YU-33223-1 |
| 2 | Tachometer | YU-8036-A |
| 3 | Digital multimeter | YU-34899-A |
| 4 | Timing light | YM-33277 |
| 5 | Dial indicator | YU-309 |
| 6 | Test propeller (115,130, L130) (150-225) | YB-1624 YB-1626 |
| 7 | Throttle sensor adjusting lead (225) | YB-06443 |
SPECIAL TOOLS FOR ENGINE SERVICE
| NO. | TOOL NAME | PART NO. |
|---|---|---|
| 1 | Engine lifting hook | YB-6202 |
| 2 | Connecting rod bearing installer | YB-6240 |
| 3 | Crankshaft bearing installer | YB-6205 |
| 4 | Oil seal installer | YB-6195 |
| 5 | Driver handle | YB-6071 |
| 6 | Piston slider | YB-34454 |
| 7 | Flywheel magneto holder | YB-6139 |
| 8 | Flywheel magneto puller | YB-6117 |
| 9 | Micrometer (75-100 mm) | YU-3009 |
| 10 | Calipers (0 -200 mm) | YU-3005 |
| 11 | Feeler gauge (in) | YU-26900-8 |
| 12 | Feeler gauge (mm) | YU-26900-9 |
| 13 | Cylinder bore gauge (50-100 mm) | YU-3017 |
SPECIAL TOOLS FOR LOWER UNIT SERVICE
| NO. | TOOL NAME | PART NO. |
|---|---|---|
| 1 | Grand nut wrench | YB-34447 |
| 2 | Bearing housing puller (Hook) | YB-6207 |
| 3 | Drive-shaft holder | YB-6201 |
| 4 | Slide hammer | YB-6096 |
| 5 | Drive-shaft puller | YB-34449 |
| 6 | Needle bearing installer and remover | YB-6194 |
| 7 | Bearing splitter | YB-6219 |
| 8 | Needle bearing installer and remover | YB-6196 |
| 9 | Pinion shim selecting tool | YB-34432 |
| 10 | Forward gear shim selecting tool | YB-34446 |
| 11 | Needle bearing and tapered roller bearing installer | YB-6200 |
| 12 | Oil seal installer | YB-6195 |
| 13 | Reverse gear shim gauge | YB-34468-A |
| 14 | Drive-shaft needle bearing depth stopper | YB-6213 |
| 15 | Bearing cup installer | YB-6199 |
| 16 | Backlash adjusting plate | YB-7003 |
| 17 | Magnetic flexible dial base | YU-34481 |
| 18 | Backlash indicator gauge | YB-6265 |
| 19 | Micrometer (0-25 mm) | YU-3006 |
SPECIAL TOOLS FOR COUNTER ROTATION LOWER UNIT SERVICE
| NO. | TOOL NAME | PART NO. |
|---|---|---|
| 20 | Propeller shaft puller | YB-6335 |
| 21 | Needle bearing installer | YB-6337 |
| 22 | Needle bearing remover | YB-6376 |
| 23 | Needle bearing installer attachment | YB-6377 |
| 24 | Bearing installer | YB-6378 |
SPECIAL TOOLS FOR POWER TRIM AND TILT SERVICE
| NO. | TOOL NAME | PART NO. |
|---|---|---|
| 1 | Trim and tilt cylinder wrench | YB-6175 |
| 2 | Trim and tilt oil pressure gauge | YB-6181 |
| 3 | Union seat seal installer | YB-6188 |
SEALING AGENTS AND LUBRICANTS
| NO. | TOOL NAME | PART NO. FOR U.S.A. | PART NO. FOR CANADA |
|---|---|---|---|
| 1 | Gasket maker | 907-90740-01-00 | 90790-74001 |
| 2 | Marine grease | LUB-GREAS-14-00 | 90890-69910-00 |
| 3 | Power trim and tilt fluid | LUB-PWRTF-11-00 | — |
| 4 | Gear case lube | LUB-GEARL-11-00 | ACC-11000-85-00 |
| 5 | Yamalube two cycle outboard oil | ACC-11000-07-01 | ACC-11000-20-01 |
