Starting system

(1) Fuse(30 A)
(2) Fuse(20 A)
(3) Starter relay
(4) Starter motor
(5) Battery
B : Black
Br : Brown
R : Red
Br/W : Brown/white
Checking the fuse
- Check the fuse for continuity. Replace if there is no continuity.

Checking the wiring harness (10 pins)
- Check the wiring harness for continuity. Replace if there is no continuity.
Checking the starter relay
Connect the digital circuit tester leads to the starter relay terminals.
Connect the brown (Br) lead to the positive battery terminal.
Connect the black (B) lead to the negative battery terminal.
Check for continuity between the starter relay terminals. Replace if there is no continuity.
Check that there is no continuity between the starter relay terminals after disconnecting the brown or black lead. Replace if there is continuity.

