¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Electrical Systems [Charging System] [2008]

Productos relacionados:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 2003 - 2005 200hp All
Yamaha International 2003 - 2005 225hp All
Yamaha International 2003 - 2005 200hp All
Yamaha Outboard 2003 - 2005 225hp All

Electrical Systems [Charging System] [2008]
LIT-18616-02-76
Yamaha Marine

Charging system

(1) Stator coil
(2) Rectifier Regulator
(3) Fuse(30 A)
(4) Starting battery
(5) Accessory battery
(6) Fuel pump driver and isolator

B : Black
G : Green
R : Red
W : White
Y : Yellow
G/W : Green/white
R/Y : Red/yellow

Checking the stator coil

  1. Remove the intake silencer and disconnect the stator coil coupler.

  2. Connect the test harness (3 pins) to the stator coil.

  3. Install the intake silencer.

Do not start the engine when the intake silencer is not installed.

  1. Measure the stator coil output peak volt age. Replace the stator coil if below specification.

Digital multimeter: YU-34899-A
Peak voltage adaptor: YU-39991
Test harness (3 pins): YB-06770

Stator coil output peak voltage: Green (G) - Green (G)

r/min Unloaded Unloaded Unloaded
r/min Cranking 1,500 3,500
DC V 10 42 93

Green/white (G/W) - Green/white (G/W)

r/min Unloaded Unloaded Unloaded
r/min Cranking 1,500 3,500
DC V 9.0 34 78

Stator coil resistance (use as reference): Green (G) - Green (G)

0.28-0.42 Ω at 20 °C (68 °F)
0.24-0.36 Ω at 20 °C (68 °F)

Green/white (G/W) - Green/white (G/W)

0.24-0.36 Ω at 20 °C (68 °F)
0.20-0.31 Ω at 20 °C (68 °F)

Checking the Rectifier Regulator

  1. Remove the intake silencer and disconnect the Rectifier Regulator coupler.
  2. Connect the test harness (2 pins) to the Rectifier Regulator.
  3. Install the intake silencer.

Do not start the engine when the intake silencer is not installed.

  1. Measure the Rectifier Regulator output peak voltage. If below specification, measure the stator coil output peak voltage. Replace the Rectifier Regulator if the out put peak voltage of the stator coil is above specification.

Disconnect the output lead couplers (blue) of the Rectifier Regulator when measuring the output peak voltage.

Digital multimeter: YU-34899-A
Peak voltage adaptor: YU-39991
Test harness (2 pins): YB-06787

Rectifier Regulator output peak voltage:
Red (R) - Black (B)
Red/yellow (R/Y) - Black (B)

r/min Unloaded Unloaded
r/min 1,500 3,500
DC V 13 13
Share on social:

Productos relacionados