WIRING DIAGRAM

(1) 20A fuse
(2) 30A fuse
(3) 10P coupler
(4) Main switch
(5) Starter motor
(6) Battery
(7) Starter relay
[A] Oil injection and 225 model
[B] Pre-mix model
B : Black
Br: Brown
R : Red
BATTERY
Refer to "GENERAL" section in chapter 3
FUSE
- Check:
• Fuse
Blown -> Replace.
Fuse rating: 12 V -20, 30
WIRING HARNESS
- Check:
• Continuity
Discontinuity ->
WIRING CONNECTION
- Check:
• Wiring connection
Poor connection -> Connect
STARTER RELAY

- Inspect:
- Brown lead terminal
- Black lead terminal
Loose -> Tighten.
- Check:
• Relay operation
Does not function -> Replace.
Checking steps:
- Connect the tester between the terminals of the starter relay as shown.
- Connect a 12 V battery.
Brown lead (1) -> Positive terminal
Black lead (2) -> Negative terminal
- Check that there is continuity between the starter relay terminals.
