¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Electrical System [Power Trim And Tilt (Ptt) Control System] [1998]

Productos relacionados:

Applicable Models

Model group Year Model Serial
Yamaha International 1998 25hp All
Yamaha Outboard 1998 25hp All

Electrical System [Power Trim And Tilt (Ptt) Control System] [1998]
LIT-18616-01-77
Yamaha Marine

POWER TRIM AND TILT (PTT) CONTROL SYSTEM (ET)

(1) Battery
(2) Fuse
(3) Trailer switch
(4) Connector
(5) PTT relay
(6) PTT motor
B : Black
G : Green
L : Blue
Lg : Light green
R : Red
Sb : Sky blue

POWER TRIM AND TILT (PTT) CONTROL SYSTEM (EHT)

(1) Battery
(2) Fuse
(3) Trailer switch
(4) PTT relay
(5) PTT motor
B : Black
G : Green
L : Blue
Lg : Light green
R : Red
Sb : Sky blue

FUSE

Refer to "STARTING SYSTEM".

BATTERY

Refer to "GENERAL" in chapter 3.

TRAILER SWITCH

  1. Check:
    • Continuity
    No continuity -> Replace.

PTT RELAY

  1. Check:
    • Continuity
    Out of specification -> Replace.
PTT relay continuity: PTT relay continuity:
Sky blue (Sb) - Black (B)
Light green (Lg) - Black (B)
Continuity
Terminal (1) - Terminal (-)
Terminal (2)-Terminal (-)
Continuity
Terminal (1) - Terminal (+)
Terminal (2) -Terminal (+)
No continuity

  1. Check:
    • Relay operation
    Does not function -> Replace.

Checking steps:
• Connect the tester between the termi nals of the PTT relay.
• Connect a 12 V battery.

Light green (Lg) lead -> Positive terminal
Black (B) lead -> Negative terminal

• Check that there is continuity between the PTT relay terminals.
• Connect the tester between the terminals of the PTT relay.
• Connect a 12 V battery.

Sky blue (Sb) lead -> Positive terminal
Black (B) lead -> Negative terminal

• Check that there is continuity between the PTT relay terminals.

PTT MOTOR

Refer to "PTT MOTOR DISASSEMBLY" in chapter 7.

Share on social:

Productos relacionados