¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Bracket Unit [Tilt Cylinder] [1996]

Productos relacionados:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1996 150hp All
Yamaha Outboard 1996 175hp All
Yamaha Outboard 1996 200hp All
Yamaha Outboard 1996 225hp All
Yamaha Outboard 1996 250hp All

Bracket Unit [Tilt Cylinder] [1996]
LIT-18616-01-41
Yamaha Marine

EXPLODED DIAGRAM

REMOVAL AND INSTALLATION CHART

Step Procedure/Part name Q’ty Service points
TILT CYLINDER DISASSEMBLY Follow the left "Step" for removal
PTT unit Refer to "POWER TRIM AND TILT UNIT REMOVAL"
1 Tilt piston assembly 1
2 Backup ring 1
3 Free piston 1
4 Backup ring 1
5 Delivery pipe 2
6 Mount pin 1
7 Tilt cylinder 1
Reverse the removal steps for installation.

SERVICE POINTS


Tilt cylinder removal and installation

  1. Loosen and tighten:
  • Tilt cylinder end screw

Tilt piston inspection

  1. Inspect:
  • Tilt piston
    Excessive scratch -> Replace.

Tilt rod inspection

  1. Inspect:
  • Tilt rod
    Bend/Excessive corrode -> Replace.
    Rust lightly -> Polish (with #400-600 abrasive paper).

Tilt cylinder assembly

  1. Fill:
  • PTT fluid

PTT fluid:
ATF (Dexiron type II)

Depress the tilt rod fully and fill the inner cylinder with ATF before installing the end screw.

Share on social:

Productos relacionados