¡PREPÁRATE PARA EL INVIERNO: Descuentos del 10 al 50 % en todas las piezas OEM!

A menos que lo prohíba el fabricante. No incluye productos de recambio ni productos de la marca Crowley Marine. Precio indicado.

Nuestros almacenes están cerrados el jueves 26 y el viernes 27 de noviembre. ¡Feliz Día de Thanksgiving de los Estados Unidos!

Busca en más de 1 millón de partes originales
Fácil de usar  diagramas de piezas Mejor precio  garantizado Soporte experto  en vivo 50+ años  al servicio de los navegantes Gran selección de piezas OEM  -  de 1950 a 2026 La mayoría de las piezas en stock  -  Cumplimiento el mismo día
Piezas están disponibles- Ejecuta el mismo día

Appendices [General Torque Specifications] [1987]

Productos relacionados:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1985 - 1990 9.9hp All

Appendices [General Torque Specifications] [1987]
LIT-18616-FT-99
Yamaha Marine

TIGHTENING TORQUE

Part to be tightened Part to be tightened Part name Thread size Q'ty Tightening torque Tightening torque Tightening torque Remarks
N•m Kgf•m ft•lb
ENGINE:
Crankcase 1st Bolt M6x P1.0 6 6 0.6 4.3
Crankcase 2nd Bolt M6x P1.0 6 12 1.2 8.6
Crankcase 1st Bolt M8x P1.25 4 15 1.5 10.8
Crankcase 2nd Bolt M8x P1.25 4 30 3.0 21.6
Cylinder head 1st Bolt M8x P1.25 6 15 1.5 10.8
Cylinder head 2nd Bolt M8x P1.25 6 30 3.0 21.6
Flywheel Nut 1 100 10.0 72
Spark plug 2 12.5 1.25 9
Connecting rod 1st Bolt M6x P1.0 4 6 0.6 4.3
Connecting rod 2nd Bolt M6x P1.0 4 14 1.4 8.6
Exhaust cover Bolt 7 12 1.2 8.6
Drive gear Nut 1 22.5 2.25 16.2
Driven gear Bolt 1 12 1.2 8.6
UPPERCASE AND GEAR CASE:
Bracket bolt Nut 1 20 2.0 14.4
Tilt stop lever Bolt 2 12 1.2 8.7
Upper side mount rubber Nut 2 21 2.1 15.1
Pinion nut Nut 1 25 2.5 18
Propeller Nut 1 17 1.7 12

GENERAL TORQUE SPECIFICATIONS

This chart specifies torque for standard fasteners with standard I.S.O. pitch treads.
Torque specifications for special components or assemblies are included in the applicable sections of this book. To avoid warpage, tighten multi-fastener assemblies in a crisscross fashion and in progressive stages until full torque is reached. Unless otherwise specified, torque specifications call for clean, dry threads. Components should be at room temperature.

A (Nut) B (Bolt) General torque specifications General torque specifications General torque specifications
Nm m•kg ft•lb
8 mm M5 4.0 0.4 2.9
10 mm M6 8.0 0.8 5.8
12 mm M8 18 1.8 13
14 mm M10 36 3.6 25
17 mm Ml2 42 4.2 30

Share on social:

Productos relacionados