OPERATION
WATER COOLING SYSTEM
The water cooling system consists of the water pump (in the lower unit), the water tube (between the lower unit and the power unit), the thermostat and the water pressure valve (in the cylinder). This system cools both the power unit and the exhaust and is shown in the schematic form below.
If overheating occurs, the components of the cooling system must be inspected for blockage, corrosion build-up or damage.
| Component inspection | Refer to page |
|---|---|
| Water pump/Impeller | 9-11 |
| Water tube | 7-15 |
| Thermostat | 6-44 |
| Water pressure valve | 6-44 |
| Cylinder head | 6-18 |
| Cylinder block | 6-32 |
COOLING SYSTEM SCHEMATIC

ENGINE LUBRICATION SYSTEM
The engine oil stored in the oil pan is pumped up by the trochoid type pump.
ENGINE OIL LUBRICATION CHART

