Service Instructions
Lower Unit Components
| 1. Gearcase | 14. Pump case panel | 27. Pin |
|---|---|---|
| 2. Dowel pin | 15. Guide stopper | 28. Shift rod |
| 3. Anode | 16. Bolt | 29. Washer |
| 4. Bolt | 17. Key | 30. O-ring |
| 5. Plug | 18. Water pump impeller | 31. O-ring |
| 6. Gasket | 19. Water pump case | 32. Shift rod guide |
| 7. Bolt (for transom S) | 20. Upper panel | 33. Shift rod boot |
| 8. Nut (for transom L) | 21. Sleeve | : 17 N-m (1.7 kgf—m, 12.3 lbf—ft) |
| 9. Washer (for transom L) | 22. Grommet | : 10 N-m (1.0 kgf—m, 7.2 lbf—ft) |
| 10. Support housing gasket | 23. Stud bolt | : 8 N-m (0.8 kgf—m, 5.8 lbf—ft) |
| 11. Driveshaft support housing | 24. Nut | : 5 N-m (0.5 kgf-m, 3.6 lbf—ft) |
| 12. Oil seal | 25. Washer | : Apply SUZUKI Water Resistant Grease. |
| 13. Pump case panel gasket | 26. Shift cam | : Apply SUZUKI Silicone Seal. |
| 1. Driveshaft | 20. Reverse gear |
|---|---|
| 2. Circlip | 21. Reverse gear backup shim |
| 3. Washer | 22. Bearing |
| 4. Driveshaft bushing | 23. Washer |
| 5. Pinion gear | 24. O-ring |
| 6. Pinion gear backup shim | 25. Propeller shaft bearing housing |
| 7. Pinion gear thrust washer | 26. Oil seal |
| 8. Forward gear bearing | 27. Bolt |
| 9. Forward gear backup shim | 28. Protector |
| 10. Forward gear | 29. Washer |
| 11. Forward gear thrust washer | 30. Stopper |
| 12. Push rod | 31. Propeller bushing |
| 13. Push rod pin | 32. Propeller |
| 14. Spring | 33. Propeller nut |
| 15. Clutch dog shifter | 34. Cotter pin |
| 16. Dog pin | : 10 N-m (1.0 kgf-m, 7.2 lbf-ft) |
| 17. Spring | : Apply SUZUKI Water Resistant Grease. |
| 18. Propeller shaft | : Apply SUZUKI Silicone Seal. |
| 19. Reverse gear thrust washer | : Apply SUZUKI Outboard Motor Gear Oil. |
