SERVICE DATA

POWERHEAD

** Figures shown are guidelines only, not absolute service limits.

ENGINE OIL PUMP

CYLINDER HEAD/CAMSHAFT


VALVE/VALVE GUIDE


CYLINDER/PISTON/PISTON RING


CRANKSHAFT/CONROD

LOWER UNIT
Design specification thickness for shim & washer.
| Pinion gear back-up shim | mm (in) | 1.0 (0.04) |
|---|---|---|
| Forward gear back-up shim | mm (in) | 1.0 (0.04) |
| Forward gear thrust washer | mm (in) | 2.0 (0.08) |
| Reverse gear thrust washer | mm (in) | 2.0 (0.08) |
| Reverse gear back-up shim | mm (in) | 1.0 (0.04) |

ELECTRICAL

STARTER MOTOR

PTT MOTOR

SELF-DIAGNOSTIC SYSTEM INDICATION
When the abnormality occurs in a signal from sensor, switch etc., the “CHECK ENGINE” lamp on the monitor-tachometer flashes (lights intermittently) according to the each code pattern with buzzer sounding.

- If more than two items fail at once, the self-diagnostic indication appears according to priority order. The indication repeats three times.
