PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Service Manual DF40, DF50 Removal Installation [85][Df40, Df50]

Related Products:
Service Manual DF40, DF50 Removal Installation [85][Df40, Df50]
99500-87J08-01E
Suzuki Marine

REMOVAL / INSTALLATION

(1) Bolt (1)
(2) Washer (1)
(3) Key (1)
(4) Flywheel (1)
(5) Battery charge coil (1)
(6) Screw (3)
(7) Rectifier & regulator (1)
(8) Bolt (2)
(9) Fuse case (1)
(10) 30A fuse (1)

REMOVAL

Prior to removing electrical parts:

● Disconnect battery cables from battery.

Battery charge coil

● Remove flywheel. (See page 3-48.)

● Remove three screws securing the battery charge coil.

● Disconnect battery charge coil lead wire connector from rectifier & regulator.

Rectifier & regulator

● Remove two bolts securing the Rectifier & regulator.

● Disconnect lead wire connectors.

Fuse case

● Disconnect fuse case lead wires from engine wiring harness and starter motor relay terminal.

INSTALLATION

Installation is reverse order of removal with special attention to the following step.

Battery charge coil

● Apply Thread Lock 1342 to the coil securing screws.

   99000-32050 : Thread Lock 1342

Wire routing

● Check wire routing. (See page 10-1 to 10-4)

Share on social:

Related Products