GEAR

- Inspect forward, reverse and pinion gear teeth and engaging dogs.
Replace gears if damaged or worn.
- Inspect forward gear bearing. Replace bearing if pitted, noisy or rough.
PROPELLER SHAFT COMPONENTS

Inspect push rod, replace if worn, broken, or tip is flattened.
Inspect clutch dog shifter. Replace if chipped, worn or dam aged.
Inspect dog pin. Replace if bent or worn.
Inspect propeller shaft / splines. Replace if worn, twisted or damaged.

- Check clutch return spring by measuring its free length.
If free length is not within specifications, replace the return spring.
Clutch return spring free length (L)
Standard : 62 mm (2.44 in.)
Service limit : 60 mm (2.36 in.)
PROPELLER SHAFT BEARING HOUSING

Inspect housing. Replace if cracked or damaged.
Inspect reverse gear bearing. Replace bearing if pitted, noisy or rough.
Inspect bearing. Replace bearing if pitted, noisy or rough.
Check condition of oil seal and O-ring.
Replace the seals if nicked, cut or worn.
