PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Service Manual DF40, DF50 Pre-Programmed Value For Fail-Safe System [68][Df40, Df50]

Related Products:
Service Manual DF40, DF50 Pre-Programmed Value For Fail-Safe System [68][Df40, Df50]
99500-87J08-01E
Suzuki Marine

FAIL-SAFE SYSTEM

The fail-safe system is closely related to the self-diagnostic system.

When an abnormality occurs in a sensor signal, the ECM ignores the out-of-range signal and assumes a pre-programmed value for the failed sensors.

This allows the engine to continue running under the fail-safe condition.

PRE-PROGRAMMED VALUE FOR FAIL-SAFE SYSTEM

FAILED ITEM PRE-PROGRAMMED VALUE
MAP sensor 1 • 319 – 475 mmHg (Correspond to approx. 750 – 4000 r/min) [NOTE 1]
CMP sensor • Fuel Injection:
1 simultaneous injection for all cylinders per 2 crankshaft rotations
• Ignition Timing:
Fixed at BTDC 5° ignition timing
Cylinder temp. sensor 60 °C (140 °F)
IAT sensor 45 °C (113 °F)
Exhaust manifold
temp sensor
60 °C (140 °F)

There is no back-up system for the ECM itself. The engine will stop if it has failed.

This value will change according to the current engine speed.

Share on social:

Related Products