PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Search Over 1 Million OEM Parts
Easy-to-use  parts diagrams Best price  guarantee Expert  live support 50+ years  of serving boaters Huge selection of OEM parts  -  from 1950 to 2026 Most parts in stock  -  Same day fulfillment
Most parts in stock- Same day fulfillment

Service Manual DF40, DF50 Periodic Maintenance Schedule [305][Df40, Df50]

Related Products:
Service Manual DF40, DF50 Periodic Maintenance Schedule [305][Df40, Df50]
99500-87J08-01E
Suzuki Marine

PERIODIC MAINTENANCE SCHEDULE

The chart below lists the recommended intervals for all the required periodic service work necessary to keep the motor operating at peak performance and economy.

Maintenance intervals should be judged by number of hours or months, whichever comes first.

More frequent servicing should be performed on outboard motors that are used under severe conditions.

PERIODIC MAINTENANCE CHART

Item to be serviced\Interval Initial 20 hrs.
or 1 month
Every 50 hrs.
or 3 months
Every 100 hrs.
or 6 months
Every 200 hrs.
or 12 months
Spark plug — — I R
Breather hose & Fuel line I I I I
Breather hose & Fuel line Replace every 2 years. Replace every 2 years. Replace every 2 years. Replace every 2 years.
Engine oil R — R R
Gear oil R — R R
Lubrication — I I I
Anodes & Bonding wires — I I I
Battery — I I I
Fuel mixture check
(02 feedback)
Perform every 2 years. Perform every 2 years. Perform every 2 years. Perform every 2 years.
Engine oil filter R — — R
Low pressure fuel filter — I I I
Low pressure fuel filter Replace every 400 hours or 2 years. Replace every 400 hours or 2 years. Replace every 400 hours or 2 years. Replace every 400 hours or 2 years.
High pressure fuel filter Replace every 1000 hours. Replace every 1000 hours. Replace every 1000 hours. Replace every 1000 hours.
Ignition timing — — — I
Idle speed I — — I
Tappet clearance — — — I
Water pump — — — I
Water pump impeller — — — R
Propeller nut & pin I — I I
Bolt & Nuts T —
T T

I: Inspect and clean, adjust, lubricate or replace, if necessary

T: Tighten

R: Replace

  • The maintenance interval of tappet clearance has been changed.

Share on social:

Related Products