ENGINE SERIAL NUMBER

The engine serial number starts from the following six-figure number located after the model pre-fix.
IDLE SPEED


Inspect initially after 20 hours (1 month) and every 200 hours (12 months).
Change the idle speed adjustment procedure as following:
The idle adjustment of 2008 model can be performed by fixing duty of IAC valve as well as DF150 – 250 model.
• Before checking idle speed, the engine should be allowed to warm up.
• Check and/or adjust idle speed after engine speed has stabilized.
- Remove the bolt and No.1 ignition coil.
- Connect special tool between No.1 ignition coil and spark plug.

- Start engine and allow to warm up.
- Attach engine tachometer to the ignition H. · T cord.

- Check engine speed .
Idle speed (no load): 800 – 900 r/min
