NEUTRAL SWITCH BRACKET

The neutral switch bracket has been changed to be secured with two bolt from the middle of 2002 year model.
When install a late type neutral switch bracket to the early cylinder, secure the neutral switch bracket with one bolt. In this case use the upper side bolt hole on the neutral switch bracket, and apply Thread Lock 1342 to the bolt.
UNDER OIL SEAL HOUSING

Before installing under oil seal housing, apply grease to oil seal lip, under oil seal housing and crankshaft.
99000-25161 : Water Resistant Grease
FORWARD GEAR THRUST WASHER

Available thickness
2.0 mm and 2.2 mm Early → 2.0 mm only Late
