IGNITION SYSTEM
IGNITION TIMING CHART
• The following chart shows example for ignition at BTDC24°.
• The ignition timing is varied by the condition of engine running.
• Angles indicated in the following chart show CRANKSHAFT angle.

CONTROL MODE
WHEN CRANKING :
The ignition timing is fixed at BTDC 7° until the engine starts.
WHEN IDLING / TROLLING :
The ignition timing is controlled to within the range of ATDC 1° to BTDC 17° to provide stable engine operation
at the specified idling / trolling speed.
When the shift lever is in neutral, if engine speed exceeds 1200 r / min , ignition timing remains fixed at BTDC 9°.
WHEN RUNNING (NORMAL OPERATION) :
The ignition timing ranges between BTDC 0° – 27° (DF40) or 24° (DF50), depending on current engine operating conditions.
WHEN DECELERATING :
When the throttle valve is closed suddenly, turning the CTP switch “ON”, ignition timing is delayed for a programmed duration to prevent engine stalling or unstable running.
SPECIFICATION

