GEAR

• Inspect forward, reverse and pinion gear teeth and engaging dogs.
Replace gears if damaged or worn.
• Inspect forward gear bearing. Replace bearing if pitted, noisy or rough.
PROPELLER SHAFT COMPONENTS

• Inspect push rod, replace if worn, broken, or tip is flattened. Inspect clutch dog shifter. Replace if chipped, worn or damaged.
• Inspect dog pin. Replace if bent or worn.
• Inspect propeller shaft / splines. Replace if worn, twisted or damaged.
• Check clutch return spring by measuring its free length.
• If free length is not within specifications, replace the return spring.
Clutch return spring free length (L)
Standard : 62 mm (2.44 in.)
Service limit : 60 mm (2.36 in.)

PROPELLER SHAFT BEARING HOUSING

• Inspect housing. Replace if cracked or damaged.
• Inspect reverse gear bearing. Replace bearing if pitted, noisy or rough.
• Inspect bearing. Replace bearing if pitted, noisy or rough.
• Check condition of oil seal and O-ring.
Replace the seals if nicked, cut or worn.
